产品中心
дома > Центр продуктов > ton bag > Type D Static Dissipative FIBC Bulk Bags

Type D Static Dissipative FIBC Bulk Bags

Type D Static Dissipative FIBC Bulk Bags

Overview

Type D static dissipative FIBC bulk bag with light blue lifting loops

Type D is the bag for the hardest electrostatic case: a flammable vapour or solvent present, and no reliable way to earth the bag. The fabric is static dissipative and works by controlled corona discharge, so charge leaves the surface without a grounding path and without an incendive spark. It is the most expensive of the four FIBC types, and the one specified when a risk assessment says grounding cannot be guaranteed.

Key specifications

TypeType D, static dissipative, no grounding required
FabricStatic dissipative PP woven with conductive filaments
Structure4-loop, open top, flat bottom
Safe working load500 – 2000 kg
Lifting4 corner loops, 70 mm webbing
OptionsCoating, PE liner, discharge spout, document pocket
MOQFrom 500 pieces

Why buyers choose Type D

  • Safe without an earth — covers the case a Type C bag cannot: solvent vapours plus a filling point with no reliable ground.

  • Dissipative by construction — conductive filaments in the weave spread and release charge across the whole surface.

  • No grounding tag to inspect — one less failure point in a plant audit.

  • Standard handling — four loops and an open top, so existing filling equipment stays in use.

Structure and materials

The body is woven from PP tapes with conductive filaments distributed through the fabric, so the surface stays in the dissipative range rather than insulating. Loops, seams and coating are specified so the dissipative path is not interrupted at the joints. Because performance depends on the whole construction rather than a single earth point, the fabric and the seams are both checked per batch rather than sampled at the end of the run.

Typical applications

  • Solvents, alcohols and flammable liquid intermediates

  • Powders wetted with flammable solvents

  • Plants where earthing at the filling point is not practical

  • Export shipments under a customer electrostatic risk assessment

Quality control

Fabric weight, dissipative treatment, seam strength, loop pull strength and dimensions are checked per batch. Filled bags are drop tested and loops lift tested at rated load before shipment.

Frequently asked questions

Type C or Type D — which do I need?

Type C if you can earth the bag at the filling point; Type D if you cannot, or if flammable vapours are present.

Does Type D need a grounding tag?

No. The dissipative fabric works without a grounding connection.

Is it reusable?

It is normally specified as a single-trip bag; reuse depends on your risk assessment and on the bag staying undamaged.

What is the minimum order?

From 500 pieces per size and design. Compare all ton bag types before specifying.

Request a quote

Tell us the solvent, the filling setup and the risk assessment outcome. Request a quote or message us on WhatsApp at +86 152 5775 2994.

Связанные теги:

Онлайн-сообщение

Пожалуйста, введите действительный адрес электронной почты.
код проверки Не может быть пустым

Связанные продукты

Нет результатов поиска!
chat

×

Этот веб-сайт использует файлы cookie, чтобы обеспечить вам максимально эффективное использование нашего веб-сайта.

Принимать отклонять